Wide-Angle No-Distortion M12 Lens for up to 1/2.3" sensors such as AR0521

Low Distortion 3.9mm M12 Lens

Das CIL039 ist ein 3,9-mm-M12-Objektiv für 1/2-Zoll-Sensoren mit bis zu 5 MP. Dank seiner Verzerrung von 0 % eignet sich das Objektiv ideal für Weitwinkelanwendungen ohne Verzerrungskorrektur.

$39.00

45pcs CIL039-F2.8-M12A650 (F/2.8 / M12A / With 650nm IRC Filter) in stock in the US

14pcs CIL039-F2.8-M12B650 (F/2.8 / M12B / With 650nm IRC Filter) in stock in the US

In stock. Orders before 12 PM PT ship same day

Objektivmerkmale

Weitwinkel-Sichtfeld

A wide, yet normal, 77° HFoV on 1/2.3″ sensors.

5 MP Auflösung

Rated for 5MP imaging.

Keine Verzerrung

0% TV distortion for an outstanding normal image.

Tabelle mit optischen und mechanischen Spezifikationen

Objektivparameter Angaben zur Leistung
ArtikelnummerCIL039
EFL3.9
F# 2.8
Beschluss5 MP
Sichtfeld77° @ 6.2mm. Calculate FoV for your sensor
Bildkreis7.8mm as designed 8.9mm maximum
Verzerrung<0.2%
Gewicht5.6g
IR-SperrfilterP/N With: CIL039-F2.8-M12A650
P/N With: CIL039-F2.8-M12B650
BauwesenHybrid aus Glas und Kunststoff
Polizeichef Ray Angle14° @ 8.2mm image circle

Mechanische Varianten

Variante Beschreibung
M12A —

Mechanischer Aufbau

Tabelle zur mechanischen Kompatibilität der Kameras*

Kamera/Halterung Kompatibilität
Commonlands CLA018 CLA018
e-con Systems S-Mount 7mm-11mm tall mount
Allied Vision Alvium S-Mount Ja
FLIR Blackfly S-Platine Ja
iDS uEye LE Rev. 1.1: Ja, Rev. 1.2: Nach dem Entfernen des Glases
The Imaging Source M12 Ja
Basler Dart S-Mount Ja

*Gilt nur für die mechanische Kompatibilität, vorausgesetzt, es handelt sich um die vom Kamerahersteller bereitgestellte Standard-Objektivfassung M12x0,5. Bitte prüfen Sie die optische Kompatibilität separat.

Same Day Ship by 12 PM PT
Mit Sitz in den USA Unterstützung im Bereich Optiktechnik
Über 25.000 Lagerbestand in Kalifornien
100 % MTF-geprüft

Häufig gestellte Fragen

What sensors work with the CIL039 3.9mm M12 lens?

The CIL039 covers 1/1.8 inch and 1/2.3 inch sensors, including the ON Semi AR0521, Sony IMX477, and AR1820. The lens is rated for 5MP imaging. Check coverage against the 7.8mm designed image circle and 8.9mm maximum.

How much distortion does the CIL039 have?

The CIL039 stays under 0.2% TV distortion. That is low enough that most barcode, measurement, and conferencing systems can skip software dewarping.

Is the CIL039 compatible with Raspberry Pi HQ Camera?

Yes, the CIL039 works with the Raspberry Pi HQ Camera using the IMX477. Use CIL039-F2.8-M12A650 when you need a 650nm IR cut filter for standard daylight imaging.

What is the field of view of the CIL039 on a 1/2.3 inch sensor?

The CIL039 gives 77° horizontal field of view on a 1/2.3 inch sensor. Use the Commonlands FoV calculator with the Commonlands field of view calculator if you want the exact number for another sensor.

Does the CIL039 M12 lens ship from the United States?

Yes, in-stock CIL039 lenses ship same day from San Diego, California for orders placed before 12 PM PST.

Are mechanical drawings available for the CIL039?

Yes, mechanical drawings are available on the product page. Contact engineering@commonlands.com if you need STP 3D model files.

The CIL039 is a 3.9mm M12 lens at F/2.8 that covers 1/1.8" to 1/2.3" sensors and is rated for 5MP imaging. It gives 77° horizontal field of view on a 6.2mm image circle, which is wide enough for barcode readers, conferencing cameras, and general machine vision without the heavy barrel distortion that usually comes with shorter M12 lenses.

Distortion stays below 0.2% TV. That number matters because most systems can skip software dewarping, which saves processing time and avoids extra latency in measurement or decoding pipelines. The 7.8mm designed image circle (8.9mm maximum) also gives you margin on 1/2" sensors like the AR0521.

Hybrid glass and plastic optics keep the lens at 5.6g, so it works well in volume builds where cost and weight both matter. The M12A variant ships standard. Order CIL039-F2.8-M12A650 with the 650nm IR cut filter for daylight machine vision, or CIL039-F2.8-M12B650 in the M12B configuration with a 650nm IR cut filter. You can confirm coverage the field of view calculator.

The lens is mechanically compatible with the Commonlands CLA018 lens holder, e-con Systems S-mount boards (7-11mm tall mount), Allied Vision Alvium, FLIR Blackfly S, iDS uEye LE (Rev1.1 only; Rev1.2 requires removing glass), The Imaging Source M12, and Basler Dart cameras.

Commonlands ships this lens same day from San Diego for orders placed before 12 PM PST. We 100% MTF test every unit. Trioptics test data and mechanical drawings are available on request.

Ähnliche M12-Objektive (S-Mount-Objektive) für die eingebettete Bildverarbeitung

Türklingelkamera mit Miniatur-M8-Fischaugenobjektiv D

CIL818

195°@5,2 mm Fisheye-Objektiv

$29.00

.STP herunterladenView product
Basler Dart-Kamera IP67 mit M12-Objektiv

CIL034

Verzerrungsfreies 3,2-mm-Objektiv

$39.00

.STP herunterladenView product
4,3-mm-M12-Objektiv für die Automobilindustrie

CIL342

4,3-mm-M12-Objektiv für die Automobilindustrie

$39.00

.STP herunterladenView product
Raspberry Pi HQ-Kamera mit 8-mm-M12-Objektiv

CIL083

8-mm-M12-Objektiv mit geringer Verzerrung

$19.00

.STP herunterladenView product
IR-korrigiertes 16-mm-M12-Objektiv

CIL162

IR Corrected 16mm M12 Lens 8MP

$70.00

.STP herunterladenView product
50-mm-M12-Teleobjektiv

CIL051

50-mm-M12-Teleobjektiv

$79.00

.STP herunterladenView product
190°@5,7 mm Fisheye-Objektiv mit M12-Anschluss

CIL290

190°@5,7 mm Fisheye-Objektiv mit M12-Anschluss

$29.00

.STP herunterladenView product
Hochauflösendes M12-Fisheye-Objektiv

CIL281

191°@6,4 mm-Fisheye-Objektiv

$70.00

.STP herunterladenView product

M12-Objektive (S-Mount-Objektive) für die eingebettete Bildverarbeitung durchsuchen

Über Commonlands

Commonlands LLC entwickelt und fertigt Präzisionsobjektive mit M12-, C-Mount- und M8-Anschlüssen für die industrielle Bildverarbeitung, Robotik und eingebettete Kamerasysteme. Mit Sitz in San Diego, Kalifornien, halten wir Lagerbestände für den Versand noch am selben Tag bereit und bieten direkten Kontakt zu unseren in den USA ansässigen Optikingenieuren. Ganz gleich, ob Sie ein einzelnes Prototyp-Objektiv oder Serienmengen von über 25.000 Stück benötigen – unser Team begleitet Sie über den gesamten Lebenszyklus hinweg, von der Beratung beim optischen Design bis hin zur Serienfertigung.

Benötigen Sie Hilfe bei der Auswahl des richtigen Objektivs für Ihr Kameramodul?

Wenden Sie sich an unsere in den USA ansässigen Optikingenieure.