Sony ISX031 3MP Rolling Shutter CMOS Sensor for Vision

ISX031 3MP sensor outputs 1937x1553 @ 60fps with high performance for industrial automation, capturing high-speed scenes. Optimized for robotics, sur.
Spezifikation Value
Part numberISX031
Resolution (H × V)1937 × 1553
Pixel pitch3.0
Package
ColorColor
ShutterRolling
Output mode1937x1553 @ 60fps @ 10-bit
InterfaceMIPI CSI-2
Dynamic range120
CRA

Why ISX031 excels in industrial barcode scanning cameras for robotics & machine‑vision cameras

Key advantages: - Higher sensitivity and reduced cost versus global‑shutter designs - Optimized for versatile robotic vision - Designed for robotics camera with HDR imaging

Find M12 lenses by browsing below our using our M12 Lens Calculator with FoV Calculations.

Verzeichnungsarmes 5mm M12-Objektiv
Verzeichnungsarmes 5mm M12-Objektiv

CIL052-F3.4-M12A650

$79.00
$0.00
Details anzeigen
10mm M12 Objektiv
10mm M12 Objektiv

CIL104-F3.8-M12A650

$49.00
$0.00
Details anzeigen
5.5mm M12 Lens
5.5mm M12 Lens

CIL355-F1.8-M12A650

$39.00
$0.00
Details anzeigen
Q: What is an M12 lens (S-mount lens)?

Answer: An M12 lens is a compact lens with a 12mm thread diameter, often called an S-mount lens. These lenses screws into a camera M12 lens mount and are easy to use. These lenses are used in board-level cameras for embedded vision systems. M12 lenses are smaller than C/CS-mount lenses, making them ideal for space-constrained applications like robotics​.

Q: What cameras can I use M12 lenses with?

A: There are many embedded vision cameras and AI cameras that are compatible with M12 lenses. As long as camera's lens holder is compatible with the mechanical dimensions of the lens, the lens should focus! Please make sure to match the image circle, FoV, and resolution.


F: Wie fokussiert man ein M12-Objektiv?

Answer: Use focus targets, then slowly thread the lens while displaying a video. Go past focus, then come back to focus. You can read our full article on how to focus camera lenses.

Suchen Sie nach Empfehlungen, wissen Sie nicht, wo Sie anfangen sollen, oder möchten Sie Anpassungen besprechen? Kontaktieren Sie unsere in den USA ansässigen Optik-Ingenieure.